2018 QUBE QAL block 17

qal block17x3

This week’s block is JUST a Quarter Square triangle x3!

it’s a 1/2 sized blocks

easy peasy…

You’ll need die #4 and fabrics B and C

Cut out 6 of each!

(I know unless you have the 9” set you’ have to cut out 8 of each- just put them aside, might need them later)

If you are using any directional fabrics, you’ll make 2 block identical and one that’s turned 90 degrees, so just remove opposite fabrics- like the sides of one fabric and the top and bottom of another- again if you’re NOT using the 9” qube set.

You’ll see what I mean at the end.

DSCF9785

When I sew QST blocks together I actually start at the center, so here it’s the top of the cut out triangle pieces.

Iron the seams open!

DSCF9796

And sew the blocks together like this

DSCF9803

Here’s my 4 versions of the 3 blocks, on both the 8” and 12” versions I used directional fabrics. it doesn’t matter which fabric is the dark or the lighter, just have 2 +1 if using directional fabrics, otherwise 3 of the same

DON’T sew the 3 blocks together!

DSCF9842

They will be touching each other but not in a straight line…..hint hint, so the middle block has to be turned 90 degrees!

Have fun!

and here’s blocks from last week’s participants

16dianasm15diangemc16diangem4debbiew16cat16geraldine16cheryl16Eva16ginger16PattyV216pattyV16janet16pam15pam16margaretb16kristine16elizabeth16gill16suemc16carol16karen16shelda16lynda16senta16susan15susan16nina16michelle14patty15pattyv16diane

2 thoughts on “2018 QUBE QAL block 17”

  1. My blocks are 1/2 size, not 1/4 size…..4 inches for an 8 inch cube. Did I miss something?

Comments are closed.

Shopping Cart